Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 77)

Specifications 5-18
Publication 198-UM002A-EN-P December 2001
Figure 5.11 198-IA2 Electrical and Application Schematic
Table 5.13 198-IA2 Specifications
Terminal Block (5.08 mm Pitch 4-Position)
Connection Capacity
Solid wire 0.13…1.5 mm 2 (24…16 AWG)
Flexible wires
0.13…2.5 mm 2 (24…14 AWG)
Flexible wires with ferrules
0.5…2.5 mm 2 (20…14 AWG)
Plastic collar
1.5 mm 2 (16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 10 mA @ 24V DC
Input Voltage Rating 120V AC
Input On-State Voltage Range 79…132V AC
Input On-State Current 11 mA @ 79V AC
16 mA @ 120V AC
Input Off-State Voltage Range <20V AC
Input Off-State Current <3.5 mA
Module Isolation 132V AC working voltage
1500V AC for 1 s
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
198-IA2
L
IN 1
IN 2
N
N
N
Input contacts or solid state switch
Typical Wiring