Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 121)

Specifications 5-62
Publication 198-UM002A-EN-P December 2001
198-IB2XOB2S-Q5 Series A (Drive Preset Speed Module)
Figure 5.41 198-IB2XOB2S-Q5 Series A Drive Preset Speed Module
The Drive Follower module 198-IB2XOB2S-Q5 is specifically designed to work with the
Bulletin 160 Drive. The module has two open-collector outputs and two isolated DC inputs,
which are powered from the DeviceNet +24V via a DC-to-DC converter. The DC-to-DC
converter provides isolation between the inputs and outputs and the DeviceNet power. IN1 is
intended to bring back the status of the relay of the drive, while IN2 is intended to bring back
the status of the disconnect means. The micro connector provides a convenient way to
connect a voltage or current speed command from the outside of the enclosure to the drive.