Gland plate mounting, Gland plate mounting -5 – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 19
Advertising
Installation 2-5
Publication 198-UM002A-EN-P December 2001
Gland Plate Mounting
Gland plates may also be referred to as cable plates. These plates are designed to cover
rectangular holes in standard enclosures, and to allow easy power and signal access to the
enclosure.
Figure 2.3 Plastic Gland Plate
Refer to Chapter 5 for a complete list of gland plate specifications.
Advertising