Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 125)

Specifications 5-66
Publication 198-UM002A-EN-P December 2001
Figure 5.42 198-IB2XOB2S-Q5 Electrical and Application Schematic (Continued)
Table 5.35 198-IB2XOB2S-Q5 Specifications
Terminal Block (2.54 mm Pitch 10-Position)
Connection Capacity
Solid wire
0.13…0.5 mm 2 (28…20 AWG)
Flexible wires 0.13…0.5 mm 2 (28…20 AWG)
Flexible wires with ferrules 0.25…0.5 mm 2 (20 AWG)
Plastic collar 0.25…0.5 mm 2 (20 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Common
Reverse Out
DRIVE
DRIVE MODULE
+10V
V in
4/20 mA
Stop
+10V
V in
4/20 mA
Reverse
Forward
Stop
Comm Comm
IN 2
IN 1
+24V DC out
+24V DC out
Forward Out
Disconnect
2
3 4
5
1
12 3
Au to closed open closed Drive runs per Drive module
Of f open open open Drive does not run
Hand closed closed closed Drive runs at programmed speed
Au to Hand
S1 1
2
Of f
3
Series A Typical Wiring to Bulletin 160 Drive with Hand-Off-Auto Forward Only