European union directive compliance, Emc directive, Low voltage directive – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 3
European Union Directive Compliance
If this product has the CE mark it is approved for installation within the European Union and
EEA regions. It has been designed and tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic
Compatibility (EMC) using the following standards, in whole or in part, documented in a
technical construction file:
•
EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial Environment
•
EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is also designated to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 60947-5-1 — Low Voltage Switchgear and Control
Gear — Control Circuit Devices and Switching Elements — Electromechanical Control
Circuit Devices.
This equipment is classified as open equipment and must be mounted in an enclosure during
operation to provide safety protection.