Verifying the output assembly, Verifying the output assembly -6 – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 53
Advertising
![background image](/manuals/577535/53/background.png)
Programming 4-6
Publication 198-UM002A-EN-P December 2001
Verifying the Output Assembly
To verify the output assembly select the
2XWSXW WDE. The following screen will appear:
Compare the above screen to the selected output assembly. For our purposes, we will
compare the above screen to output assembly 104.
Notice that both output assembly 104 and the assembly shown in the above screen both
require 6 bytes. In this instance, you will not need to edit the I/O parameters. If your
assembly matches the output assembly seen in RSNetworx, you may skip to the next section.
Advertising