Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 72)

5-13 Specifications
Publication 198-UM002A-EN-P December 2001
Table 5.9 198-IB4 Specifications
Terminal Block (5.08 mm Pitch 6-Position — Series A, 5.08 mm Pitch 8-position — Series B)
Connection Capacity
Solid wire 0.13…1.5 mm 2 (24…16 AWG)
Flexible wires
0.13…2.5 mm
2
(24…14 AWG)
Flexible wires with ferrules 0.5…2.5 mm 2 (20…14 AWG)
Plastic collar 1.5 mm 2 (16 AWG)
Wire Type Use 75 C copper wire min.
Tightening Torque Spring clamp
Electrical
Module Voltage Rating 24V DC
Module Operating Voltage Range 11…25V DC
Module Current Draw without Sensor 17 mA @ 24V DC
Input Voltage Rating 24V DC
Input On-State Voltage Range 10…26V DC
Input On-State Current 3.0 mA @ 10V DC
7.2 mA @ 24V DC
Input Off-State Voltage Range 0…5V DC
Input Off-State Current <1.5 mA
Module Isolation 132V AC working voltage
1500V AC for 1 s
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Environmental
Ambient Temperature Operating –25…+40°C (–4…+104°F)
Storage –40…+85°C (–40…+185°F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked) cULus Listed
CE marked for all applicable directives