Appendix b - motor starter operation, Appendix b — motor starter operation, Motor starter operation – Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual User Manual
Page 169: Appendix
Publication 198-UM002A-EN-P December 2001
Appendix
B
Motor Starter Operation
The Cat. No. 198-DNG MDSA DeviceNet Module is used as a component in a line of
Allen-Bradley distributed motor starters. The following Allen Bradley distributed starter
catalog numbers are currently available
•
190-D – Across-the-Line Distributed Starter
•
191-D – Reversing Distributed Starter
•
160-D – Variable Frequency Inverter Distributed Starter.
When the Cat. No. 198-DNG DeviceNet Module is used in one of the Allen-Bradley
distributed starters, it is convenient to have the starter present itself on a DeviceNet network
as a distributed starter instead of as an MDSA. The Cat. No. 198-DNG MDSA DeviceNet
module can be programmed so that it presents itself on a DeviceNet network as a distributed
starter instead of as a communication adapter.
A “Motor Starter Type” parameter (parameter 51) is used to configure the Cat. No.
198-DNG as a Distributed Motor Starter. When the value of the Motor Starter Parameter is
set to a in the table below, it identifies itself as shown in Table B.1.