Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 149)

DeviceNet Information A-15
Publication 198-UM002A-EN-P December 2001
Instance 103
This input (produced) assembly was included in the Series B MDSA. Its length (in bytes) is
equal to the number of I/O modules on the back-plane plus 4 bytes of status information. It
has the following format:
Instance 105
This is the default input (produced) assembly for the Cat. No. 198-DNG. It was included in
the Series B MDSA as the default produced assembly. It is eight bytes long (6 I/O modules
on an MDSA gland plate, plus 2 bytes of status). It has the following format:
Table A.21 Instance 103 — Modular Input Assembly Instance for
Cat. No. 198-DNG
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Location 1 Location 0 Status 6 Status 5 Status 4 Status 3 Status 2 Status 1
1 Error 6 Error 5 Error 4 Error 3 Error 2 Error 1 Error 0 Location 2
2 Location 7 Location 6 Location 5 Location 4 Location 3 Location 2 Location 1 Location 0
3 Error 7 Error 6 Error 5 Error 4 Error 3 Error 2 Error 1 Error 0
4 Module 1 data
5 Module 2 data
6 Module 3 data
: :
: :
n Module n data
Table A.22 Instance 105 — Default Input Assembly Instance for Cat. No. 198-DNG
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Location 1 Location 0 Status 6 Status 5 Status 4 Status 3 Status 2 Status 1
1 Error 6 Error 5 Error 4 Error 3 Error 2 Error 1 Error 0 Location 2
4 Module 1 data
5 Module 2 data
6 Module 3 data
7 Module 4 data
8 Module 5 data
9 Module 6 data