Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 138)

A-4 DeviceNet Information
Publication 198-UM002A-EN-P December 2001
DeviceNet Object Definitions
The following object classes are supported.
➊ The Control Supervisor Object and the Overload Objects must be supported as part of the “Motor Starter”
Device Profile defined in the DeviceNet Specification. These two objects are only functional when the “Motor
Starter Type” attribute in the DeviceNet Interface object is set to a value greater than zero. This results in the
MDSA reporting a Device Type of 22 (Motor Starter). For a complete description of Motor Starter Type
operation refer to Appendix B.
Identity Object
CLASS CODE 0x0001
The following class attributes will be supported for the Identity Object:
Table A.1
Class Object Class Object
0x0001 Identity 0x002B Acknowledge Handler
0x0002 Message Router 0x002C* Overload Object
0x0003 DeviceNet 0x00B4 DN Interface Object
0x0004 Assembly 0x0307 Boolean Function Block
0x0005 Connection 0x0308 Bistable Function Block
0x0008 Discrete Input Point 0x0309 Counter Function Block
0x0009 Discrete Output Point 0x030A Timer Function Block
0x001D Discrete Input Group 0x030E Logic Supervisor
0x001E Discrete Output Group 0x030F Produced Network Data
0x0029 ➊ Control Supervisor
Table A.2
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 1