Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 14)

1-4 Product Overview
Publication 198-UM002A-EN-P December 2001
Cat. Nos.
The catalog numbering scheme for the Modular DSA I/O System is explained in Figure 1.4
and Figure 1.5 below. Note that all cat. nos. begin with 198, which stands for Bulletin 198
Modular DSA I/O System.
Figure 1.4 Modular DSA — DeviceNet Cat. No.
Figure 1.5 Modular DSA I/O System — I/O Module Cat. No.
DeviceNet Compatibility
The Modular DSA I/O System communicates as a Group 2 slave device via DeviceNet
Protocol. It supports the Explicit, Polled I/O, Cyclic I/O, and Change of State (COS) I/O
messaging of the predefined master/slave connection set and two additional explicit
connections available through Group 1 or Group 3.
G Gland Plate
No Selection DIN Mount
DN DeviceNet
Bulletin No.
198 – DNG
No. of Inputs
No. of Outputs
Output
AND
Input
Bulletin No.
Input Type
A AC
B DC
Output Type
W Relay
B DC
DeviceNet Sourced
Q5 M12 1-Key 5-Pin
G4 1/2" 2-Key 4-Pin
198 – IB2XOB2S-Q5