Rockwell Automation 198 Series C Modular DeviceNet Starter Auxiliary User Manual - Manual (Page 120)

5-61 Specifications
Publication 198-UM002A-EN-P December 2001
Tightening Torque Spring clamp
Electrical
Module Operating Voltage Range 11…25V DC
Module Voltage Rating 24V DC
Module Current Draw 100 mA @ 24V DC
Input Voltage Rating 24V DC (sourced from module)
Input On-State Voltage Range 10…26V DC
Input On-State Current 3.0 mA @ 10V DC
7.2 mA @ 26V DC
Input Off-State Voltage Range 0…5V DC
Input Off-State Current <1.5 mA
Input Filter — Software
Selectable (with two I/O modules) Off to On 1, 2, 4, 8, 16 ms
On to Off 1.3, 2, 4, 8, 16 ms
Input Compatibility IEC 1+
Output Voltage Rating 24V DC
Output Load Current 5 mA per output
Switching Device Solid-State
Module Isolation 132V AC working voltage
1500V AC for 1 min.
Environmental
Ambient Temperature Operating –25…+40
°
C (–4…+104
°
F)
Storage –40…+85 ° C (–40…+185 ° F)
Relative Humidity 0…95% non-condensing
Shock Operating 30 g peak acceleration
Non-Operating 50 g peak acceleration
Operating Vibration 10 g @ 58…2000 Hz
0.060 in. peak-to-peak displacement 2…57 Hz
Per IEC 68-2-6
Approvals
Agency Certification
(when product is marked) cULus Listed
CE marked for all applicable directives
Table 5.33 198-IB2XOB5S Specifications (Continued)