Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 128)

3-54 Operator Interface
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
The printer can automatically print out the alarms as they occur.
This feature is selected as one of the report formats. In the Figure
3.78, the "AUTO - ON" indicates that this feature is currently
enabled. To disable the feature, use the [cursor down] key to select
the text, and press the [enter] key. The text will change to "AUTO -
OFF" (if a printer is attached). The automatic alarm printout feature
is now disabled. Pressing the [enter] key again while selected will
enable the feature.
Figure 3.78 – Typical Printer Screen
Perform Diagnostic Trending The diagnostic trending operation of screens allows you to capture
the relationships of a number of parameters over a period of time.
Within this operation you will:
• Define the Parameters to which the Trend Apply
• Define the Trigger Condition to Begin the Trend
• Define the Sampling Rate and position of the Trigger
• View the results of the Trend
You will access the Diagnostic Trend operation from the Top Level
Menu by pressing the [F9] key. This results in the display of the
screen shown in Figure 3.79.
Figure 3.79 – Diagnostic Screen