Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 40)

2-10 Drive Installation
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
Installation (cont.) Locate the exhaust hood on top of the cabinet per Figure 2.6 and re-
install the original cover plate previously set aside. (Care must be
taken that the notches on the bottom flange are oriented toward the
sides of the drive). Affix assembly to the drive top plate. Tighten all
hardware.
For drives with an acoustic hood (shown in Figure 2.5), locate the
exhaust hood (refer to Figure 2.7).
A T T E N T I O N A T T E N T I O N Any screws that are accidentally dropped in
the equipment must be retrieved as damage
or injury may occur.
Ensure notch
orientation
to sides
Assembled Exhaust Hood
M6 Screw
(Quantity = 12)
Figure 2.6 – Fan Hood Installation