Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 368)

5-126
Component Definition and Maintenance
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
Here is a typical pin out of a complete null-modem cable. Essentially,
only 3 pins (2, 3 and 5) are all that is required.
Method
1.
Connect your laptop to the drive using a 9-pin null-modem cable
to DPM data port (J4).
2.
Set up HyperTerminal connection
-
Run HyperTerminal program
-
At the ‘Connection Description’ window, enter any name for
new connection under the Name field as shown below and then
click OK.
-
The ‘Connect to’ window will appear as shown below. Select
COM1 from the dropdown list next to ‘Connect using’ and then
click OK.
Printing (Uploading)
Control Data
(cont.)