Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 85)

Operator Interface 3-11
7000 “A” Frame 7000A-RM001A-EN-P – January 2011
Top Level Menu
This screen (Figure 3.6) represents the main menu from which all
other screens (and the operations which they perform) are activated.
To activate an operation, simply press the function key corresponding
to the 'Softkey' shown on the screen. A screen for that operation will
be displayed. Refer to the section entitled "How To:" for information
about the various operations which may be performed.
The screen identifies the drive product to which the operator
interface is attached and its overall state of operation. Four digital
meters show four selected parameters located in the drive. A Hobbs
meter displays the number of hours that the drive has been running.
The status of the drive will show one of the following:
NOT READY – drive is not ready to start
READY – drive will start when commanded
FORWARD RN – drive is running in the forward direction
REVERSE RN – drive is running in the reverse direction
WARNING – drive has a warning
FAULTED – the drive is faulted
DISCHARGING – waiting for the input filter capacitor to
discharge on an Active Front End drive
before re-start
Figure 3.6 – Top Level Menu