Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 51)

Drive Installation 2-21
7000 “A” Frame 7000A-RM001A-EN-P – January 2011
Cabling Cabinet #1 The cabling cabinet of the drive with integral line reactor and input
starter is located in the left-hand section. The mounting and location
of the line reactor and input starter are shown along with customer
cable termination locations. The circulating fans for the cabinet are
located on top.
Note: This cabinet is also available
without integral starter (see
Figure 2.16). The width of the cabinet changes as a function of the
drive voltage ratings.
Line Cable Terminations
(behind Disconnect Switch)
Vacuum Contactor Assembly
Motor Cable Terminations
(Hall Effect Sensors behind)
Fused Disconnect Switch
AC Line Reactor
Disconnect Switch Operating Handle
Control Power Transformer Fuses
Control Power Transformer
Figure 2.14 – Cabling Cabinet for Configuration #1 with Input Starters