Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 46)

2-16 Drive Installation
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
Cabinet Layout and
Dimensional Drawings
of Drive The following dimension drawing is a sample and may not accurately
detail your drive. It is provided here to give you a general overview
of a typical drive.
The Dimensional Drawings are order specific and will show the
information outlined.
The dimension drawing provides important information for the
installation of the equipment.
The
FLOOR PLAN shows:
• the locations for anchoring the equipment to the floor (balloon D)
• size and location of openings for bottom power cable entry
(balloons A and B)
• size and location of openings for bottom control wiring entry
(balloon C)
The
ROOF PLAN shows:
• size and location of openings for top power cable entry (balloons
A and B)
• size and location of openings for top control wiring entry
(balloon C)
• minimum aisle clearance in front of equipment (balloon M)
The
Front View shows:
• minimum clearance required at top of drive for fan maintenance
(balloon K)