Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 80)

3-6 Operator Interface
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
The upper left-hand corner contains the name of the screen (i.e.
SELECT GROUP:). Knowing the name of the screen will assist you
in the orientation of the menu system. On some screens to the right
of the screen name, will be the name of the selected item from the
previous screen as shown in Figure 3.3.
Some screens have more than one page associated with them. The
current page number and the number of pages which make up the
data currently being displayed on the screen is shown in the upper
right hand corner, (i.e. showing page 1 of 2 pages).
Along the bottom of the screen are one or two rows of 'Softkeys'
which represent the assignment to the actual function keys. In
Figure 3.2, Softkeys F6-F10 are shown. Pressing F8 will display the
next page of data.
In the very lower right-hand corner is a small dot. This dot indicates
the healthy state of the operator interface terminal. Under normal
conditions this dot will flash at a rate of .5 Hz. During
communication errors, the dot will flash at a rate of .1 Hz.
Figure 3.3 – Screen Name & Item
The remainder of the screen shows the data from the drive. The
presentation of the data is dependent on the screen. Screens that
allow an item to be selected show the current selection in reverse
video. An example of this is shown in Figure 3.2 in which the Speed
Control group is selected.
Information Windows
Numerous screens require communications with the drive in order to
function. At times, the duration of this activity will be noticeable to
you. During this activity, a special 'window' is used within the
current screen to inform you of this activity. The time required for
the activity will vary.