Rockwell Automation 7000A PowerFlex Medium Voltage AC Drive - Air-Cooled (A Frame) - Manual (Page 129)

Operator Interface 3-55
7000 “A” Frame 7000A-RM001A-EN-P – January 2011
From this screen, additional screens are accessible to perform the
diagnostic trending functions. The screen shows the current status of
the trend, (Unprogrammed, Running, Triggered, Stopped). If a
trigger has been defined, the trigger parameter, its trigger condition
and the type of trigger will be displayed.
If data has already been captured, a time stamp indicating the last
time the given trigger has occurred. This captured data can be
viewed by pressing the [F9] softkey.
When a trigger has been defined, and is currently "Stopped", it can
be re-started by pressing the [F7] key. If the status is "Running", the
user can force the trigger to occur by pressing the [F2] key. Note
that in doing so, that the trigger condition did not actually occur, but
all data buffers can be viewed as if the condition had occurred.
To define a trend, press the [F8] key to display the setup screen,
shown in Figure 3.80.
Figure 3.80 – Diagnostic Setup
Figure 3.81 – Assign a Trace