Rockwell Automation 8720MC Drives Integration Manual - Manual (Page 9)

Publication 8720MC-IN002A-EN-P — December 2002
Preface P-3
Related Documentation The following documents contain additional information concerning
related Allen-Bradley products. To obtain a copy, contact your local
Allen-Bradley office, distributor, or download them from
TheAutomationBookstore.com.
Conventions Used in this
Manual The following conventions are used throughout this manual.
• Bulleted lists such as this one provide information, not procedural
steps
• Numbered lists provide sequential steps or hierarchical
information
• Words that you type or select appear in bold
• When we refer you to another location, the section or chapter
name appears in italics
For: Read This Document: Publication Number:
Information on installation and wiring of your 8720MC drive 8720MC High Performance Drive Installation Manual 8720MC-IN001x-EN-P
The instructions needed for the installation and wiring of the
8720MC-RPS
8720MC Regenerative Power Supply User Manual 8720MC-RM001x-US-P
The instructions needed for the installation of the 8720SM
motors 8720SM High Performance AC Induction Motors
Installation Instructions
8720SM-IN001x-EN-P
The information necessary to select, configure, and install the
Bulletin 1336 Heavy Duty Dynamic Brake
Heavy Duty Dynamic Braking Installation Instructions 1336-5.64
Specifications and descriptions of the Industrial Motion Control
drive products and accessories
Motion Control Selection Guide GMC-SG001x-EN-P
Application sizing and configuration information Motion Book Servo Sizing CD (v4.0 or above) Motion Book-mmmyy
More detailed information on the use of ControlLogix ™ motion
features and application examples
ControlLogix Motion Module Programming Manual 1756-RM086x-EN-P
8 or 16 Axis SERCOS interface module installation instructions
8 or 16 Axis SERCOS interface Module Installation
Instructions
1756-IN572x-EN-P
The instructions needed to program a motion application
Logix™ Controller Motion Instruction Set Reference
Manual
1756-RM007x-EN-P
Information on configuring and troubleshooting your ControlLogix
motion module ControlLogix Motion Module Setup and Configuration
Manual
1756-UM006x-EN-P
The instructions needed to monitor and edit parameters using
DriveExplorer™ software
DriveExplorer Getting Results Manual 9306-GR001x-EN-E
Information, examples, and techniques designed to minimize
system failures caused by electrical noise System Design for Control of Electrical Noise Reference
Manual
GMC-RM001x-EN-P
For declarations of conformity (DoC) currently available from
Rockwell Automation
Rockwell Automation Product Certification website
www.ab.com/
certification/ce/docs
An article on wire sizes and types for grounding electrical
equipment
National Electrical Code
Published by the National
Fire Protection Association
of Boston, MA.
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary AG-7.1