Rockwell Automation 8720MC Drives Integration Manual - Manual (Page 97)

Publication 8720MC-IN002A-EN-P — December 2002
Using the Human Interface Module (HIM) B-3
HIM Display Panel Keys
The HIM programming panel provides the 5 keys and a 2 line by 16
character LCD display as shown in Figure B.2.
Figure B.2
HIM Display/Program Keys
SEL
JOG
ESC
Program Panel
Sys Ready
+0 rpm
Press this key: To: It is called:
Go back one level in the menu tree that the
HIM uses to organize information
Escape key
Alternates which display line (top or bottom) is
currently active. Also allows navigation in
numerical fields or bit patterns
Select key
Increment (increase) the selected value. If no
value is selected, use this key to scroll through
the groups or parameters that are currently
selected.
Increment key
Decrement (decrease) the selected value. If no
value is selected, use this key to scroll through
the groups or parameters that are currently
selected.
Decrement key
Select the group or parameter that is currently
active or enter the selected parameter value
into memory. The top line of the display
automatically becomes active to let you choose
another parameter or group.
Enter key
ESC
SEL