Rockwell Automation 8720MC Drives Integration Manual - Manual (Page 99)

Publication 8720MC-IN002A-EN-P — December 2002
Using the Human Interface Module (HIM) B-5
HIM Control Panel Indicators
The HIM control panel has the following indicators.
HIM Operation Initial Status Display
When you first apply power to the 8720MC Drive, the HIM cycles
through a series of displays. These displays show the initialization and
communication status. When complete, the following type of status
display is shown. The display indicates the current status of the drive
(such as Sys Bus Chrg or Enabled) or any faults that may be present.
The display hardware is a two line, 16 characters per line, LCD display
panel. Selecting one of the 2 display lines is accomplished with the
“Sel” select button.
Figure B.4
Initial Status Display
This indicator: Provides information about: It is called:
The direction of motor rotation Direction LED
An approximate visual indication of the
command manual jog speed. This indicator is
only available with digital speed control.
Speed Indicator
y S s R e a d y
30387-M