Zilog Z16C35 User Manual

Page 222

Advertising
background image

Application Note
The Zilog Datacom Family with the 80186 CPU

9-12

SERIAL INTERFACING (Continued)

Comparison of the two preceding charts leads to several
conclusions:

Pins 1-5 can always be jumpered straight across from a
J5-J10 connector block to a J13-J15 connector block.

In a synchronous environment, the Transmit clock can
be either driven or received and the Receive clock can
be received from the DTE connector or sent on the DCE
connector.

The 10-pin J11 and J12 jumper blocks provide for
connections to the Port pins of the IUSC and (M)USC,
respectively. As with J5-J10, these connections may be to
the customer’s off-board custom circuits and/or to certain
pins in the J13-J15 blocks. The following pin assignment is
determined so that if a 2-channel USC is plugged into the
(M)USC socket, J12 has the same pin-out for the USC’s B
channel as do J5-J10 for other channels.

Finally, an unpopulated 4-pin oscillator socket is included
on the board with its output connected to a single
jumper/wire-wrap pin. This socket can be populated with a
user-supplied oscillator and connected to various clock
pin(s) among J5-J15.

7

/DCD

/DCD

Output to J1B, J2B, J3B

8

/DCD

/DDC

Input from J1A, J2A, J3A, J4

9
10

GND

GND

GND

GND

11

/RxC

/RxC

Output to J1B, J2B, J3B

12

/RxC

/RxC

Input from J1A, J2A, J3A

13

/TxCO

/TxCI

/TxCO

/TxCI

Output to J1-3

14

/TxCI

/TxCO

/TxCI

/TxCO

Input from J1-3 [3]

15

/RI

Output to J1B, J2B

16

/RI

Input from J1A, J2A

Table 10. Pin Assignments of Line Driver/Receiver Connectors

J13-J14

J13-J14

J15

J15

Pin #

DTE signal

DCE signal

DTE signal

DCE signal

Direction/where used

Note:
[3] Various conventions have been used to combine synchronous clock inputs and modem control inputs on Apple Macintosh connectors
similar to J4, as described in a later section.

Table 11. Pin Assignments of Controller Port Connectors

Pin #

J11: IUSC Signal

J12: (M)USC Signal

1

PORT1 (Clock 1 In)

PORT1

2

PORT4 (Xmit TSA Gate Out)

PORT4 (Xmit TSA Gate Out)

3

(N/C)

(N/C)

4

PORT0 (Clock 0 In)

PORT0

5

(N/C)

(N/C)

6

PORT3 (Rcv TSA Gate Out)

PORT3 (Rcv TSA Gate Out)

7

(N/C)

(SYSCLK)

8

PORT5 (Rcv Sync Out)

PORT5 (Rcv Sync Out)

9

PORT2

PORT2

10

GND

GND

11

PORT6 (Rcv Sync In)

PORT6 (Rcv Sync In)

12

PORT7 (Xmit Complete Out)

PORT7 (Xmit Complete Out)

Page 216 of 316

UM011002-0808

UM011001-0601

Advertising