Zilog Z16C35 User Manual

Page 9

Advertising
background image

ISCC

User Manual

UM011002-0808

3

•

Independent DMA Register Set

•

A Universal Bus Interface Unit Providing Simple Interface to Most CPUs Multiplexed
or Non-Multiplexed Bus; Compatible with 680X0 and 8X86 CPUs

•

32-Bit Addresses Multiplexed to 16-pin Address/Data Lines

•

8-Bit Data Supporting High/Low Byte Swapping

•

10 MHz Timing

•

12.5 and 16 MHz Timing Planned

•

68-Pin PLCC

•

Supports all Zilog CMOS SCC Features:

•

Two Independent, 0 to 4.0 Mbit/Second, Full-Duplex Channels, Each with a Separate
Crystal Oscillator, Baud Rate Generator, and Digital Phase-Locked Loop Circuit for
Clock Recovery.

•

Multi-Protocol Operation under Program Control; Programmable for NRZ, NRZI, or
FM Data Encoding.

•

Asynchronous Mode with Five to Eight Bits and One, One and One-Half, or Two Stop
Bits per Character; Programmable Clock Factor; Break Detection and Generation; Par-
ity, Overrun, and Framing Error Detection.

•

Synchronous Mode with Internal or External Character Synchronization on One or
Two Synchronous Characters and CRC Generation and Checking with CRC-16 or
CRC-CCITT preset to either 1’s or 0’s.

•

SDLC/HDLC Mode with Comprehensive Frame-Level Control, Automatic Zero Inser-
tion and Deletion, I-Field Residue Handling, Abort Generation and Detection, CRC
Generation and Checking, and SDLC Loop Mode Operation.

•

Local Loopback and Auto Echo modes

•

Supports T1 Digital Trunk

•

Enhanced SDLC 10x19 Status FIFO for DMA Support

•

Full CMOS SCC Register Set

Page 3 of 316

Advertising