1 main menu page – Comtech EF Data CDD-562L User Manual
Page 109
CDD-562L/564 Demodulator with IP Module
Revision 2
CDD-56X CLI and Telnet Operation
MN/CDD564L.IOM
8–5
8.2.1 Main Menu page
The Main Menu page provides access to the following submenus:
Selection
Entry Description
Administration
A
Provides a basic set of standard administrative functions to the
demodulator. When connected via Telnet, navigation to this
menu is restricted to the Admin user.
Interface Configuration
I
Allows configuration of the Ethernet and Satellite interfaces.
Route Table
R
Defines how the demodulator routes packets that it receives on its
Ethernet and Satellite interfaces.
Protocol Configuration
P
Allows configuration of various protocols used by the demodulator.
These protocols currently include ARP and IGMP.
Vipersat Configuration
V
Viewable/selectable only when the demodulator is used in a
Vipersat system.
For details on configuration and use of the CDD-56X Vipersat
feature, consult adjunct Comtech EF Data publication MN/22137 –
Vipersat CDD-56X Series Satellite Network Demodulator Router
User Guide.
Satellite Demod Configuration
M
Allows configuration and monitoring of the satellite base unit.
Operations and Maintenance
O
Allows configuration of various control and maintenance options for
the system. Diagnostic/troubleshooting tools, and Statistics pages
are also accessible.
8.2.2