Comtech EF Data CDD-562L - Manual (Page 177)

CDD-562L/564 Demodulator with IP Module Revision 2
HTTP (Web Server) Interface MN/CDD564L.IOM
9–17
Use the provided drop-down list to set operation for each of the following parameters:
• Decoder • Descrambling • Rx Spectrum Inversion
• Rx Data Sense Inversion • Statistics Log Interval
The following operational statistics are provided on a read-only basis and cannot be changed:
• Eb/No • Signal Level • Frequency Offset
• Temperature • BER • Terminal Rx Frequency
Alarm Mask
Set the Rx AGC, Eb/No, or LNB (when available) Alarm Mask by clicking Masked or Active.
Click [Submit] to execute the changes made on this page.