Comtech EF Data CDD-562L - Manual (Page 18)

CDD-562L/564 Demodulator with Optional IP Module Revision 2
Preface MN/CDD564L.IOM
xvi
• EN 55024 – Information Technology Equipment: Immunity Characteristics, Limits, and
Methods of Measurement.
• EN 61000-3-2 – Harmonic Currents Emission
• EN 61000-3-3 – Voltage Fluctuations and Flicker.
• EN 61000-4-2 – ESD Immunity
• EN 61000-4-4 – EFT Burst Immunity
• EN 61000-4-5 – Surge Immunity
• EN 61000-4-6 – RF Conducted Immunity
• EN 61000-4-8 – Power Frequency Magnetic Field Immunity
• EN 61000-4-9 – Pulse Magnetic Field Immunity
• EN 61000-4-11 – Voltage Dips, Interruptions, and Variations Immunity
• EN 61000-4-13 – Immunity to Harmonics
• Federal Communications Commission Federal Code of Regulation FCC Part 15,
Subpart B.
TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY
THESE INSTRUCTIONS:
• Use coaxial cable that is of good quality (e.g., RG58/U (50Ω) or RG59/U (75Ω)) for
connections to the IF Tx and Rx (transmit and receive) BNC female connectors.
• Use Type 'D' connectors that have back-shells with continuous metallic shielding.
Type ‘D’ cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back-shell.
• Operate the unit with its cover on at all times.
European Union Low Voltage Directive (LVD) (2006/95/EC)
Symbol Description
<HAR> Type of power cord required for use in the European Community.
CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung
!