Comtech EF Data CDD-562L - Manual (Page 50)

CDD-562L/564 Demodulator with IP Module Revision 2
Rear Panel Connections MN/CDD564L.IOM
3–4
3.2.2 Terrestrial Data Connection – 10/100 Ethernet (RJ-45 Traffic/M&C
Port)
The 10/100 BaseT Ethernet port is a standard 8-pin RJ-45 modular jack,
It is used for Ethernet traffic, management of CDD-562L/564/564L IP
Module functions via Telnet/HTTP/SNMP, and for updating of the
demodulator’s IP Module firmware.
Note the following:
Pin # Function
1 Tx+
2 Tx-
3 Rx+
4 N/C
5 N/C
6 Rx-
7 N/C
8 N/C