3 (vlan) brouter page – Comtech EF Data CDD-562L User Manual

Page 130

Advertising
background image

CDD-562L/564 Demodulator with IP Module

Revision 2

CDD-56X CLI and Telnet Operation

MN/CDD564L.IOM

8–26

8.2.5.3 (VLAN) Brouter page

Access the Brouter Configuration page from the Protocol Configuration page.























This page contains the following unique selections/fields:

Selection

Entry

Description

VLAN Brouter Mode

B

Toggle VLAN Brouter Mode as [Enabled] or [Disabled]. This

feature allows VLAN tagged packets to be forwarded when in

Router mode.


Notes:

1. This feature is automatically disabled when Managed Switch

Mode is selected.

2. Header Compression must be purchased and available for

this feature to work.

VLAN Brouter Next Hop MAC

N

Allows user to enter a Next Hop MAC address in 01-02-03-04-05-

06 format.

VLAN Brouter Remote Mode

Enable

R

Toggle VLAN Brouter Remote Mode as [Enabled] or [Disabled]. In

this mode, IP traffic received from the WAN interface will not be

forwarded back to the WAN interface even though the route table
matches.

VLAN Filtering

F

Toggle Filtering Mode as [Enabled] or [Disabled]. This feature,

when Enabled, allows the filtering of "Brouted" Packets – i.e., this

will permit the bridging of VLAN destination packets and the routing

of non-VLAN traffic using static route table information.

VLAN ID 1 through

VLAN ID 10

1-9,

A (for 10)

Enter a valid ID in the range of 0000 to 4095.

Advertising
This manual is related to the following products: