Comtech EF Data CDD-562L - Manual (Page 113)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–9
8.2.2.3 Feature Configuration page
• Chapter 1. INTRODUCTION
• Appendix A. FAST ACTIVATION PROCEDURE
Access the Feature Configuration from the Administration page to display the current availability
for each feature. Any feature marked “Unavailable” is a FAST feature that must be activated with
a FAST Option Purchase Access Code.
This page contains the following unique selections/fields:
Selection Entry Description
Ping Reply P Toggles [Enabled] or [Disabled]:
• Enabled tells the demodulator to respond to ping requests
directed to the demodulator Ethernet Interface.
• Disabled tells the demodulator not to respond to ping
requests. This is used as a security feature to prevent
unauthorized parities from determining if a device exists via
the ping utility.
Telnet E Toggles [Enabled] or [Disabled]:
• Enabled allows access via Telnet.
• Disabled denies access via Telnet.
SNMP N Toggles [Enabled] or [Disabled]:
• Enabled tells the demodulator to respond to SNMP requests
against the private and public MIB.
• Disabled tells the demodulator not to respond to SNMP
requests against the private and public MIB.