Comtech EF Data CDD-562L - Manual (Page 65)

CDD-562L/564 Demodulator with IP Module Revision 2
IP Module Ethernet Interface MN/CDD564L.IOM
4–9
4.4.1.1 Router Working Mode – Point-to-Point
Figure 4-1 shows an example setup using the CDD-562L L-Band Satellite Dual Demodulator at a
Hub site to receive two separate DVB return channels.
Note the following:
• The CDD-562L and all CDM-IP modems are in Point-to-Point Mode.
• Each remote site has a CDM-IP modem with a default static route.
• The CDD-562L has a default static route directing traffic to the hub router.
• The hub router would have routes defined for each remote network that would be directed
to the DVB Encapsulator.
Figure 4-1. (CDD-562L) Router Mode Point-to-Point Diagram