Comtech EF Data CDD-562L User Manual
Page 174
CDD-562L/564 Demodulator with IP Module
Revision 2
HTTP (Web Server) Interface
MN/CDD564L.IOM
9–14
• Click Yes or No to Enable Authentication Trap.
• Assign the SNMP Trap IP Primary and Trap IP Secondary addresses.
• Use the drop-down list to set the Trap Version as SNMPv1 or SNMPv2.
Assign the SNMP Read, Write, and Trap Community Strings. Each Community String may
consist of a minimum of 0 to a maximum of 20 alphanumeric characters in length.
The factory defaults for these parameters are as follows:
o
Read Community String
public
o
Write Community String
private
o
Trap Communty String comtech
• Assign the SNMP Contact, SNMP Name, and SNMP Location.
Vipersat Management
For details on configuration and use of Vipersat operations via the HTTP
Interface, consult adjunct Comtech EF Data publication MN/22137 – Vipersat
CDD-56X Series Satellite Network Demodulator Router User Guide
Click [Submit] to execute the changes made on this page.