Comtech EF Data CDD-562L - Manual (Page 231)

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–15
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Telnet timeout TET= 2 bytes Command or Query.
Defines inactivity timeout on CLI menu screen, where Telnet login timeout = 1 to 60;
Resolution=1 minute
Example: <1/TET=50 TET =
TET!
TET? TET =xx
(see Description of Arguments)
TX Header
Compression
enable/disable THE= 1 byte, value of
0, 1, 2 or 3 Command or Query.
Enables or disables the Transmit 3xDES feature, where:
1 = Enabled (EasyConnect Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Note: Acts as command only in EasyConnect mode; in router mode, it’s read-only.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased.
THE =
THE!
THE? THE =x
(see Description of Arguments)
Telnet Enabled TLE= 1 byte, value of
0 or 1 Command or Query
Enables or disables the telnet interface, where:
0 = Disabled
1 = Enabled
Note: When disabled, the user will not be able to log in to the telnet interface. TLE =
TLE!
TLE? TLE =x
(see Description of Arguments)
TX Payload
Compression
enable/disable TPE= 1 byte, value of
0, 1, 2 or 3 Command or Query
Enables or disables the Transmit 3xDES feature, where:
0 = Disabled
1 = Enabled (EasyConnect Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Note: Acts as command only in EasyConnect mode; in router mode, it’s read-only.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased
TPE =
TPE!
TPE? TPE =x
(see Description of Arguments)