Comtech EF Data CDD-562L - Manual (Page 249)

CDD-562L/564 Demodulator with IP Module Revision 2
Appendix D MN/CDD564L.IOM
D–33
Param File Tag Values Associated with Parameter
ADMIN_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
READWRITE_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
READONLY_PWD
NONE – When not set
Xxxx/yyy format with xxx-user name and yyy-password. Like comtech/comtech.
ACCESS_CLIENT
NOT-DEFINED/NA – When not set
Valid IP address like 192.168.001.001/32
ACCESS_ENFORCEMENT_ENABLE
Enabled
Disabled
PING_REPLY_ENABLE
Enabled
Disabled
TELNETD_ENABLE
Enabled
Disabled
SNMP_ENABLE
Enabled
Disabled
IGMP_ENABLE
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled
GENERIC_DOWNLINK_MCAST
Enabled
Disabled
QOS_ENABLE
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled
TRANS_DES_ENABLE
Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect
TX_HDR_COMPRESSION_ENABLE
Unavailable – If system does not has this FAST Feature available.
Per Route – If the system working mode is Router-Small, Router-Large, Router-PtoP
Enabled – If system working mode is EasyConnect
Disabled – If system working mode is EasyConnect
RX_HDR_COMPRESSION_ENABLE
Unavailable – If system does not has this FAST Feature available.
Enabled
Disabled