Comtech EF Data CDD-562L - Manual (Page 79)

CDD-562L/564 Demodulator with IP Module Revision 2
Updating Firmware MN/CDD564L.IOM
5–9
Step Task
5 Change the desired image to boot.
By default, the demodulator will boot to the version with the latest date (Boot to – Latest).
“Boot to” can also be set to force the demodulator to boot up using either Image #1 or
Image #2. The unit will then need to be reset (i.e., rebooted or power cycled) from the serial
console, Web Server Interface, or CLI/Telnet for the firmware upgrade selection to become
active:
• To reset from the Web Server Interface – Select the Maint | Reboot page, and then
click [Yes, Reboot].
• To reset from the CLI/Telnet Main Menu – Select Operations and Maintenance [O],
and then select Reset [R].
The CDD-56X is now operating with its latest firmware. The firmware update process is now
complete.