2 satellite/hdlc interface page – Comtech EF Data CDD-562L User Manual

Page 122

Advertising
background image

CDD-562L/564 Demodulator with IP Module

Revision 2

CDD-56X CLI and Telnet Operation

MN/CDD564L.IOM

8–18

8.2.3.2 Satellite/HDLC Interface page

Access the Satellite/HDLC Interface page from the Interface Configuration page.















This page contains the following unique selections/fields:

Selection

Entry Description

HDLC Addr Mode

[RO]

Point-To-Point Mode – In this mode of operation, no HDLC

address is used over the satellite link. The restrictions on
using this mode are that it can only be used for pure Point-to-

Point configurations.

Small Network Mode (up to 254 addresses) - In this mode of

operation, demodulator expects a single byte HDLC address

over the satellite link (0x1 – 0xFE).

Large Network Mode (up to 32766 addresses) - In this mode

of operation, demodulator expects two byte HDLC address

over the satellite link (0x1 – 0xFFFE).

Receive HDLC Channel Addresses

(Per Demod)

H

Opens Receiver HDLC Channel Addresses (Per Demod) page.

Advertising
This manual is related to the following products: