Comtech EF Data CDD-562L - Manual (Page 129)

CDD-562L/564 Demodulator with IP Module Revision 2
CDD-56X CLI and Telnet Operation MN/CDD564L.IOM
8–25
Selection Entry Description
Flush ARP Table F Allows the entire ARP table [Dynamic Entries] to be removed. This
is equivalent to performing the standard UNIX command “arp –d” on
each address reported in an “arp –a” command.
The command only flushes the dynamic ARP entries. The static
ARP entries will not be removed.
Base B Allows user to view up to 8 different Static ARP definitions per
screen. To allow editing on any of the 256 entries that can be
defined, the user can select a base address to control which 8 ARP
entries are displayed.
For example, if the user wants to edit static ARP Entries 32-40,
then a Base value of 32 should be defined.