Setting the log host – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 123
102
Field Description
Level
Display the system information levels. The information is classified into eight
levels depending on severity:
•
Emergency—The system is unusable.
•
Alert—Action must be taken immediately.
•
Critical—Critical conditions.
•
Error—Error conditions.
•
Warning—Warning conditions.
•
Notification—Normal but significant condition.
•
Information—Informational messages.
•
Debug—Debug-level messages.
Digest
Display the brief description of system logs.
Description
Display the contents of system logs.
Setting the log host
You can set the loghost on the Web interface to enable the system to output syslogs to the log host. You
can specify a maximum of four different log hosts.
To set the log host:
1.
Select Device > Syslog from the navigation tree.
2.
Click the Loghost tab.
The loghost configuration page appears.
Figure 63 Setting the loghost