Configuring a vlan pool, Creating a vlan pool – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 774
753
Configuring a VLAN pool
Creating a VLAN pool
1.
Select Advanced > VLAN Pool from the navigation tree.
2.
Click Add.
Figure 780 Creating a VLAN pool
3.
Configure VLAN pool as described in
.
4.
Click Apply.
Table 258 Configuration items
Item Description
VLAN Pool
Specify the name for a VLAN pool.
By default, no VLAN pool exists.
You can create up to 32 VLAN pools.
VLAN List
Configure the VLAN list in a VLAN pool.
By default, no VLAN list exists in a VLAN pool.
Deleting a VLAN in the VLAN list does not affect clients getting online through the VLAN.
After a VLAN pool assigns a VLAN ID to a client, if the client goes offline and goes online by using the
same SSID within a certain time, the VLAN pool assigns the previous VLAN ID rather than a new VLAN
ID to the client. In addition, this client is not counted in the number of clients in each VLAN on the VLAN
Info tab.
The AP selects a VLAN ID for a client in the following order:
1.
VLAN ID assigned by the authentication server.
2.
These two kinds of VLAN ID enjoy the same priority:
VLAN ID in the VLAN pool.
VLAN ID specified in the bound service template.
3.
VLAN ID bound on the Wireless Service > Access Service page.
Configurations with a higher priority will overwrite the one with lower priority.