H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 443
Advertising
422
Figure 440 Configuring the AP
2.
Configure wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click Add.
c.
On the page that appears, set the service name to dot1x, select the wireless service type
Crypto, and click Apply.
Figure 441 Configuring a wireless service
3.
Configure local authentication:
After you create a wireless service, you will enter the wireless service configuration page. Select
Local from the Authentication Mode list.
Advertising
This manual is related to the following products: