Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 532
Advertising
511
Figure 544 Network diagram
Configuration procedure
1.
Before you configure automatic power adjustment, configure AP 1 through AP 4 on the AC to
establish a connection between the AC and each AP.
For the related configuration, see "
."
2.
Configure automatic power adjustment:
a.
Select Radio > Calibration from the navigation tree.
b.
Click the Parameters tab.
c.
Select Auto from the Dynamic Power Select list.
d.
Click Apply.
Advertising
This manual is related to the following products: