Configuring ac 2 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 790
Advertising
769
Figure 799 Configuring the IP address of the backup AC
Configuring AC 2
1.
Configure AP to establish a connection between AC 2 and AP.
For more information about configurations, see "
."
2.
Leave the default value of the AP connection priority unchanged. (Details not shown.)
3.
Select Advanced > AC Backup from the navigation tree.
4.
On the page that appears, select the IPv4 box, set the address of the backup AC to 1.1.1.4, and
select enable to enable the fast backup mode.
5.
Click Apply.
Advertising
This manual is related to the following products: