H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 821
800
b.
Click Add.
c.
On the page that appears, set the service name to band-navigation, select the wireless service
type Clear, and click Apply.
3.
Enable wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Set the band-navigation box.
c.
Click Enable.
4.
Bind an AP radio to the wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click the
icon for the wireless service band-navigation.
c.
Select the boxes next to ap1 with radio types 802.11n(2.4GHz) and 802.11n(5GHz).
d.
Click Bind.
Figure 845 Binding an AP radio
5.
Enable 802.11n(2.4GHz) and 802.11n(5GHz) radios:
a.
Select Radio > Radio Setup from the navigation tree.
b.
Select the boxes next to ap1 with the radio modes 802.11n(2.4GHz) and 802.11n(5GHz).
c.
Click Enable.
6.
Configure band navigation:
a.
Select Advance > Band Navigation from the navigation tree.
b.
On the page that appears, click Enable, and type the Session Threshold 2 and Gap 1. Use the
default values for other options.
c.
Click Apply.