Verifying the configuration, Ap provision configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 816
795
Figure 835 Configuring and enabling wireless sniffer
Verifying the configuration
•
Capture AP captures wireless packets and saves the packets to a CAP file in the default storage
medium. Administrators can download the file to the PC and get the packet information by using
tools such as Ethereal.
•
When the total number of captured packets reaches the upper limit, Capture AP stops capturing
packets.
AP provision configuration example
Network requirements
Configure AP provision on AC 1 to assign the following network settings to AP 1 and AP 2:
•
IP address 2.2.2.1/24 for AC 1 so that AP 1 and AP 2 can discover AC 1.
•
IP address 1.1.1.1/24 for AP 1 and IP address 1.1.1.2/24 for AP 2.
•
Username test and password test for AP 1 and AP 2 when they operate as 802.1X clients.
•
Authentication method peap-mschapv2.
•
802.1X client function for Ethernet interfaces on AP 1 and AP 2.
Figure 836 Network diagram