Ap configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 77
56
Item Description
Key ID
Select the WEP key index: 1, 2, 3, or 4. Each number represents one of the four
static keys of WEP. The selected key index will be used for frame encryption and
decryption.
IMPORTANT:
If you select the option to enable Provide Key Automatically, only 1, 2, and 3 are
available for the Key ID option.
Key Length
Select the key length.
•
When the key type is WEP40, the key length can be five alphanumeric
characters or 10 hexadecimal characters.
•
When the key type is WEP104, the key length can be 13 alphanumeric
characters or 26 hexadecimal characters.
•
When the key type is WEP128, the key length can be 16 alphanumeric
characters or 32 hexadecimal characters.
WEP Key
Enter the WEP key.
AP configuration
1.
On the guest service configuration page, click Next.
The AP Configuration page appears.
2.
Configure an AP and click Add.
You can configure multiple APs on the page. The section at the bottom of the page displays all
existing APs.
Figure 28 AP Configuration page
3.
Configure the parameters as described in
.