H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 85)

64
Field Description
Beacon-measurement Interval Intervals (in seconds) at which beacon measurement requests are sent.
Beacon-measurement Type Beacon measurement type: Passive, Active, or Beacon-table.
SSID-hide
• Disable—The SSID is advertised in beacon frames.
• Enable—Disables the advertisement of the SSID in beacon frames.
WEP Key Index WEP key index used for encrypting or decrypting frames.
WEP Key Mode
WEP key mode:
• HEX—The WEP key is a hexadecimal number string.
• ASCII—The WEP key is a character string.
WEP Key WEP key.
Cipher Suite Cipher suite: AES-CCMP, TKIP, WEP40, WEP104, or WEP128.
TKIP Countermeasure Time(s) TKIP countermeasure time in seconds.
PTK Life Time(s) PTK lifetime in seconds.
GTK Rekey GTK rekey configured.
GTK Rekey Method GTK rekey method configured: packet based or time based.
GTK Rekey Time(s)
Time for GTK rekey in seconds.
• If Time is selected, the GTK will be refreshed after a specified period
of time.
• If Packet is selected, the GTK will be refreshed after a specified
number of packets are transmitted.
Forwarding Method
Forwarding mode:
• Policy-based forwarding.
• Remote forwarding.
• Local forwarding.
PMF Status
Status of management frame protection:
• Disable—Management frame protection is disabled.
• Optional—Management frame protection is enabled and all clients
can be associated with the AP.
• Mandatory—Management frame protection is enabled and only
clients supporting management frame protection can be associated
with the AP.
Service Template Status
Status of service template:
• Enable—Enables WLAN service.
• Disable—Disables WLAN service.
Maximum clients per BSS Maximum number of associated clients per BSS.
IP Verify Source
Status of IPv4 source address verification:
• Enable—Verifies the source address of an IPv4 client.
• Disable—Does not verify the source address of an IPv4 client.
IPv6 Verify Source
Status of IPv6 source address verification:
• Enable—Verifies the source address of an IPv6 client.
• Disable—Does not verify the source address of an IPv6 client.
Bonjour Policy Name of the Bonjour policy applied to the service template.