H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 676)

655
Table 213 Configuration items
Item Description
ACL Select the WLAN-AP ACL for which you want to configure rules.
Rule ID
Specify an ID for the rule.
If you do not specify the rule ID, the system will assign one automatically.
If the rule ID you specify already exists, the following operations modify the configuration
of the rule.
Action
Select the action to be performed for APs matching the rule:
• Permit—Allows matched APs.
• Deny—Drops matched APs.
MAC address
Set the MAC address range of APs.
MAC Mask
Serial ID Set the serial ID of an AP.
Adding an IPv6 ACL
1. Select QoS > ACL IPv6 from the navigation tree.
2. Click the Add tab.
Figure 689 Adding an IPv6 ACL
3. Configure the IPv6 ACL information, as described in Table 214 .
4. Click Apply.