Recommended configuration procedure, Configuring static name resolution table, Configuring dynamic domain name resolution – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 253: Configuring dns proxy
232
Recommended configuration procedure
Configuring static name resolution table
Task Remarks
Configuring static name resolution table
Required.
By default, no host name-to-IP address mappings are
configured in the static domain name resolution table.
Configuring dynamic domain name resolution
Step Remarks
1. Configuring dynamic domain name resolution
Required.
This function is disabled by default.
2. Adding a DNS server address
Required.
Not configured by default.
3. Adding a domain name suffix
Optional.
Not configured by default.
Optional.
Configuring DNS proxy
Step Remarks
Required.
By default, the device is not a DNS proxy.
2. Adding a DNS server address
Required.
Not configured by default.
Configuring static name resolution table
1.
From the navigation tree, select Network > DNS.
The default static domain name resolution configuration page appears, as shown in