Configuring radios, Configuring radio parameters – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 497
Advertising
476
•
With RRM collaboration enabled, if the detected channel quality is lower than the threshold, the AC
automatically adjusts the working channel upon detecting a channel with a higher quality.
Administrators can view the interference information on the AC, or view real-time spectrum analysis data
on the NMS to locate and remove the interferences.
For more information about WIDS, see "
Configuring radios
Configuring radio parameters
1.
Select Radio > Radio from the navigation tree.
2.
Click the
icon for the desired AP.
Figure 519 802.11a/b/g/n radio setup
Advertising
This manual is related to the following products: